• Straightening, Cutting and Bending Machines – MSR

    Experience Performance.

    Financing Services Form

    Name

    Email

    Phone

    Country:

    Company

    Message



    captcha

Straightening, cutting, and bending from the coil using multi-rotor straightening machines The MSR and Twin MSR series straightening/bending machines work off coil and thus optimize the flow of production. Low storage costs and easier material handling boost cost-effective production. Coupling the machines with a double-bending unit with automatic former changeover transforms the machines into a multi-functional, high-performance coil-processing station for the production of rebar material and stirrups.
MSR 16MSR 20MSR 25
Wire diameters6 – 16 mm8 – 20 mm12 – 25 mm
No. of rotorsUp to 6Up to 6Up to 5
Diameter changeoverFully automaticFully automaticFully automatic
Electric servo-drives (no hydraulics)YesYesYes
Max. feeding rate160 m/min.160 m/min.120 m/min.
Automatic rotor adjustment – ARVOptionalOptionalNo
Flying shearOptionalOptionalNo
Twin MSR 16Twin MSR 20
Wire diameter6 – 16 mm8 – 20 mm
Diameter changeoverFully automaticFully automatic
No. of rotorsUp to 8Up to 8
Max. feeding rate2×160 m/min.2×160 m/min.
Electric servo-drives (no hydraulics)YesYes
Automatic rotor adjustment – ARVOptionalOptional
Flying shearOptionalOptional
Run-off models2BK 162BK 202BK 25ETIOT
Single-strand diameter6 – 16 mm8 – 20 mm12 – 25 mm6 – 16 mm6 – 16 mm
Double-strand diameter6 – 12 mm8 – 16 mm12 – 20 mm6 – 12 mm6 – 12 mm
Central clamping unitYesYesYesNoNo
Automatic former changeoverOptionalOptionalOptionalOptional/
Production lengthCustomizedCustomizedCustomizedCustomizedCustomized
Bending angle+180°/ -180°+180°/ -180°+180°/ -180°+180°/ -90°+180°/ -90°; z-Form

Collaborative Approach

We get to know your business as well as our own

We work with you to maximize your capital budget – and we continue this relationship long after the sale is made. Our engineering team works with you long-term to ensure you get the support you need to achieve your business goals.

Team and Expertise

We know precast. We invented vibration technology over 50 years ago

We have refined the precast technology by consulting with over 500 plants worldwide while staying current and involved through our volunteer board-level commitment to industry associations.

Simple is better

Our equipment is designed with simplicity in mind

Fewer components and less complexity means you have less down-time, less frequent maintenance issues, and fewer hassles.

Performance & Results

Our equipment provides guaranteed ROI

We work with you long-term to ensure you achieve your performance goals. We establish your goals when we begin working together to ensure we know and can fulfill your objectives.